This is not an OEM part
Please feel free to contact us if you have any problem
How to Replace an Electric Oven Bake Element
. Shut off electrical power
2. Remove the bottom panel
Lift the back of the panel slightly and push back to release the bottom oven panel from the retaining lip. Push down on a front corner of the bottom panel so it tips enough that you can grasp it. Work the bottom oven panel up and out of the oven.
3. Detach the bake element
Remove the mounting front and back screws of the bake element.
4. Disconnect the wires
Carefully pull the bake element forward until you can reach the wires attached to the back of it. Use needle-nose pliers to disconnect the wires, taking care not to let the wires slip through the holes at the back of the oven. If the wires slip through the holes, you must pull the oven out of the cabinet to retrieve them.
5. Connect the new element
Connect the wires to the back of the new bake element. Push the female spade connectors onto the spades on the new bake element. Push the female spade connectors until they are seated properly and fully connected.Carefully push the leads of the bake element into the holes at the back of the oven.
. Fasten the element to the oven
. Reinstall the bottom panel
8. Reinstall the racks
9. Restore power to the oven